What a lacquered wood bracelet & bangle box is — and what it has to do
A bracelet or bangle box holds a round piece in shape with a cushioned bar or ring, so a bangle does not flatten or a chain bracelet does not tangle. The insert is shaped to the diameter of the pieces you sell.
A lacquered bangle box is made with a removable lined cushion, so the same box can present a bangle in store and then travel with the customer as a keepsake.
How a lacquered wood bracelet & bangle box is built inside
A bangle box is built around a C-shaped or cylindrical cushion: the bangle slides over the cushion and is held open in its true round. A chain bracelet uses a long box instead — a full-length pad with a central slot into which the bracelet is laid, or a removable cylindrical pillow it wraps around.
Fit. The cushion diameter is cut to the inside diameter of the bangle — usually 60–70 mm — so a rigid bangle sits snug without being stretched; for hinged bangles the cushion is slightly smaller so the hinge is not stressed when closed.
In lacquered wood. Inside a lacquered shell the insert sits in a routed recess rather than against a wrapped wall, so the insert is cut to the recess and the lining is turned into the gap — the lacquered rim stays clean and the pad cannot lift. Shell walls are thicker than a moulded box, which is why a wood box feels heavier for the same internal size.
Formats we make: C-cushion bangle box · round bangle box · long slotted bracelet box · removable-pillow box · cuff box with an open-front cushion.
Why lacquered wood for bracelet and bangle boxes
A lacquered wood box is a keepsake in its own right. The shell is built up in layers and hand-sprayed to a deep, even shine, giving a weight and quality that customers keep long after the sale.
Because a wooden shell is cut rather than moulded, the external dimensions are free — this is the route we recommend when a piece needs a size that no ready tooling matches. Lacquer is applied in several coats with sanding between, so the finish depth and gloss level (high gloss, satin or matte) are part of the specification.
Any lacquer colour can be matched, with piano black, deep burgundy and warm walnut the most requested; interiors are lined in velvet or suede to protect the piece against the hard shell.
It suits higher-value pieces, collectors, watch brands and gifting where the box is expected to be kept and reused.
Specification at a glance
| Piece held | Bracelet |
|---|---|
| Insert | A c-shaped bangle cushion, or a long slotted pad / removable pillow for chain bracelets |
| Fit detail | The cushion diameter is cut to the inside diameter of the bangle — usually 60–70 mm — so a rigid bangle sits snug without being stretched; for hinged bangles the cushion is slightly smaller so the hinge is not stressed when closed. |
| Typical external size | Bangle boxes are commonly 90–100 mm square and 40–50 mm deep; long bracelet boxes run 180–220 mm by 50–60 mm. |
| Formats | C-cushion bangle box · round bangle box · long slotted bracelet box · removable-pillow box · cuff box with an open-front cushion |
| Exterior | Lacquered Wood — piano black, burgundy, walnut, ivory, navy, forest green |
| Hand feel | Heavy, lacquered, keepsake — the box stays on the dressing table |
| Insert construction | Lined pads set into a routed recess |
| Interior lining | Velvet, microfibre suede or satin, in a matching or contrast colour |
| Logo | On lacquer the logo is normally printed or foil-stamped on the lid, or set as a metal plate; a debossed logo is also possible under the lacquer for a subtle 'in the surface' look. |
| Closure | Hinged lid with a snap or magnetic catch; ribbon or clasp on travel formats |
| Shell route | Ready tooling library (no mould charge) where a standard size fits; fully custom dimensions on a wooden shell where it does not |
| Sample | A physical pre-production sample is made and approved before any bulk run |
| Quantity & lead time | Quoted per project — structure, materials and any tooling decide both; tell us the quantity you have in mind |
Two ways to get the size you need
Every box starts with the piece, and the piece decides the shell route:
- Ready tooling library. We hold a range of existing moulded shells in the common jewellery-box sizes. Where one of these fits your piece, there is no mould charge and the box is faster to produce — you choose the finish, lining and logo on a proven shell.
- Fully custom dimensions. Where no standard shell suits — an unusual bracelet, a signature proportion, a matching family of sizes — we build the box on a wooden shell cut to your dimensions and finished in lacquer or wrapped in your chosen material.
We will tell you which route fits your brief before quoting, so there are no surprises on tooling or timing.
What we check on every lacquered wood bracelet & bangle box
Before a sample is sent, and again on every bulk run, each lacquered wood bracelet & bangle box is checked against the same points — the insert is lined pads set into a routed recess, so the fit checks below are read against that construction:
- bangle sits round on the cushion, not flattened
- cushion clears the hinge on a hinged bangle
- chain bracelet lies flat in the slot with the clasp tucked
- cushion is firmly seated and does not rock in the cavity
- the lacquer is even across all faces with no dust or orange peel at the corners
- lid and base outlines match exactly when closed — same footprint, same corner radius
- insert fills the cavity with no gap to the wall; walls are an even thickness
- lacquered wood panels have continuous grain or nap with straight, even seams
The most common faults we see in bracelet and bangle boxes bought elsewhere are a cushion cut to the outside diameter (the bangle floats), a slot too shallow for a heavy link bracelet, and a lid that touches the top of the bangle. Each of those is a specification decision, and we make it with you before the sample.
Made to your brand
Your size, your lining, your colour, your logo. On lacquer the logo is normally printed or foil-stamped on the lid, or set as a metal plate; a debossed logo is also possible under the lacquer for a subtle 'in the surface' look. Lacquer is durable but shows fingerprints on high gloss — a satin finish is the practical choice for display boxes that are handled daily.
You approve a physical sample before bulk, and the bulk order is held to the sample you approved — the same lacquered wood, the same insert, the same logo position.
How ordering works
Send us the bracelet dimensions (or the piece itself), the quantity you have in mind, your logo artwork and any colour references. We confirm the shell route and the insert, quote one clear all-in price, and make a pre-production sample for you to approve. Production follows the approved sample. Quantities and lead times are agreed per project rather than fixed, because structure, materials and any tooling decide both.
Why Chung Ngai
Chung Ngai is a manufacturer and supplier of jewellery and watch packaging, Hong Kong owned and managed since 1971. We build and check boxes by hand, quote one transparent price, and hold every bulk run to the approved sample. For lacquered wood bracelet and bangle boxes made to your brand, that consistency is what keeps jewellers re-ordering.