What a microfibre suede earring box is — and what it has to do
An earring box holds a pair neatly with slots, a flap or a foam pad, so studs and drops stay together and face forward. Small and precise, it is one of the most-used boxes in any jewellery range.
A suede earring pad holds fine posts firmly and shows no hole when the earrings are removed, so the box can be re-used for another pair without looking worn.
How a microfibre suede earring box is built inside
The base pad carries two pin holes or two short slits set a fixed distance apart; the earring posts push through and the pair stands upright, side by side. For drops and hoops a small covered flap replaces the pad — the posts go through the flap and the drops hang free below it, so nothing is crushed when the lid closes.
Fit. Pin holes are pierced, not cut, so the pad grips a standard 0.8 mm post; the two holes sit 15–20 mm apart so the pair reads as a pair without touching.
In microfibre suede. Microfibre suede has a short nap and no stretch, so an insert covered in it is cut almost to the finished dimension — only a quarter millimetre is allowed per face — and curved forms such as pillows and C-cushions can be covered in one piece with the seam hidden underneath. The surface is brushed once after fitting to lift the nap.
Formats we make: stud box with a pierced pad · slit pad for lever-backs · flap box for drops and hoops · deep box for chandeliers.
Why microfibre suede for earring boxes
Microfibre suede gives a warm, matte, tactile finish that photographs exceptionally well — a quiet-luxury look that reads beautifully on a product page. It is soft to the touch yet more colour-stable than natural suede.
Microfibre suede has a short, even nap and no stretch, so it wraps tight radii cleanly and shows no seams on curved inserts — which is why it is our default lining for pillows, C-shaped bangle cushions and ring rolls. It is non-reflective, so under studio lighting the piece, not the box, catches the light.
Suede colours are muted by nature — greys, taupes, sage, dusty blues and off-whites — and it holds colour well under shop lighting.
It suits e-commerce brands who shoot their own unboxing content, minimalist and contemporary jewellery labels.
Specification at a glance
| Piece held | Pair of earrings |
|---|---|
| Insert | A twin-hole or twin-slit pad, or a covered flap for drops and hoops |
| Fit detail | Pin holes are pierced, not cut, so the pad grips a standard 0.8 mm post; the two holes sit 15–20 mm apart so the pair reads as a pair without touching. |
| Typical external size | Most earring boxes are 55–75 mm square and 30–40 mm deep; drop-earring flap boxes go deeper — 45–55 mm — to give the drops room to hang. |
| Formats | stud box with a pierced pad · slit pad for lever-backs · flap box for drops and hoops · deep box for chandeliers |
| Exterior | Microfibre Suede — stone grey, taupe, sage, dusty blue, off-white, charcoal |
| Hand feel | Matte, warm, quiet — photographs without a highlight |
| Insert construction | Suede-covered pads with a hidden underside seam |
| Interior lining | Microfibre Suede throughout, or a contrast lining inside the lid |
| Logo | Suede takes a subtle debossed logo elegantly; foil is possible but reads softer than on PU, so most brands choose a blind deboss or a metal plate. |
| Closure | Hinged lid with a snap or magnetic catch; ribbon or clasp on travel formats |
| Shell route | Ready tooling library (no mould charge) where a standard size fits; fully custom dimensions on a wooden shell where it does not |
| Sample | A physical pre-production sample is made and approved before any bulk run |
| Quantity & lead time | Quoted per project — structure, materials and any tooling decide both; tell us the quantity you have in mind |
Two ways to get the size you need
Every box starts with the piece, and the piece decides the shell route:
- Ready tooling library. We hold a range of existing moulded shells in the common jewellery-box sizes. Where one of these fits your piece, there is no mould charge and the box is faster to produce — you choose the finish, lining and logo on a proven shell.
- Fully custom dimensions. Where no standard shell suits — an unusual pair of earrings, a signature proportion, a matching family of sizes — we build the box on a wooden shell cut to your dimensions and finished in lacquer or wrapped in your chosen material.
We will tell you which route fits your brief before quoting, so there are no surprises on tooling or timing.
What we check on every microfibre suede earring box
Before a sample is sent, and again on every bulk run, each microfibre suede earring box is checked against the same points — the insert is suede-covered pads with a hidden underside seam, so the fit checks below are read against that construction:
- both earrings stand upright and face forward at the same angle
- posts are gripped by the pad and do not fall out when the box is tilted
- drops hang free of the base when the lid is closed
- the pair is centred in the box, not pushed to one side
- the suede shows one even shade across all faces with no pressure marks
- lid and base outlines match exactly when closed — same footprint, same corner radius
- insert fills the cavity with no gap to the wall; walls are an even thickness
- microfibre suede panels have continuous grain or nap with straight, even seams
The most common faults we see in earring boxes bought elsewhere are holes punched too large for fine posts, a pad too thin to grip, and a flap box too shallow so the drops touch the base. Each of those is a specification decision, and we make it with you before the sample.
Made to your brand
Your size, your lining, your colour, your logo. Suede takes a subtle debossed logo elegantly; foil is possible but reads softer than on PU, so most brands choose a blind deboss or a metal plate. Suede shows dust more than PU, so boxes are individually bagged for transit; it brushes clean in use.
You approve a physical sample before bulk, and the bulk order is held to the sample you approved — the same microfibre suede, the same insert, the same logo position.
How ordering works
Send us the pair of earrings dimensions (or the piece itself), the quantity you have in mind, your logo artwork and any colour references. We confirm the shell route and the insert, quote one clear all-in price, and make a pre-production sample for you to approve. Production follows the approved sample. Quantities and lead times are agreed per project rather than fixed, because structure, materials and any tooling decide both.
Why Chung Ngai
Chung Ngai is a manufacturer and supplier of jewellery and watch packaging, Hong Kong owned and managed since 1971. We build and check boxes by hand, quote one transparent price, and hold every bulk run to the approved sample. For microfibre suede earring boxes made to your brand, that consistency is what keeps jewellers re-ordering.